HC-882 Single Component Acidic Curing Silicone Glass Glue is engineered for superior bonding and sealing performance in both indoor and outdoor glass projects, decorative caulking, cabinet projects, aluminum alloy glass doors and windows installation, and high-end showcase assembly and sealing projects.
Designed for Versatility:
This advanced formula is suitable for a variety of materials including glass, ceramics, fiberglass, non-oily wood, and aluminum profiles. However, for aluminum alloy surfaces sprayed with powder, it is essential to thoroughly remove the surface coating wax with a solvent prior to application.
Application Flexibility:
While our HC-882 excels in a wide range of projects, there are certain limitations to consider. It is not recommended for use on concrete or cement building materials, structural components, or substrates containing zinc, brass, copper, or lead. Additionally, it is not intended for continuous immersion in water or environments completely isolated from air before curing. For surfaces requiring painting or demanding architectural-grade sealants, alternative solutions are recommended.
Enhanced Shelf Life:
Our HC-882 boasts a shelf life of 9 months, ensuring reliability and longevity for your projects.
Experience the Professional Difference:
With HC-882, you can trust in professional-grade performance for your bonding and sealing needs. Whether it's indoor or outdoor applications, decorative or structural projects, our silicone glass glue delivers exceptional results every time.
PERFORMANCE DATA |
|
|
Test Parameter |
Unit |
Result |
As Supplied Tested at 23ºC and 50% RH |
Specific Gravity |
g/ml |
0.94±0.02 |
Flow (sag or slump) |
mm |
0 |
Extrusion Rate |
ml/minute |
140 |
Skin Time |
minute |
5~10 |
Tack-free Time |
hour |
≤1.0 |
Curing time (5mm) |
hour |
≤16 |
As Cured-after 21 days at 23ºC and 50% RH |
Durometer Hardness, Shore A |
Points |
18 |
Movement Capability |
% |
25 |
Tensile/Modulus at 50% Elongation |
Mpa |
0.24 |
Tensile/Modulus at 100% Elongation |
Mpa |
0.28 |
Ultimate Tensile Strength |
Mpa |
0.32 |
Ultimate Elongation at Break |
% |
315 |
We use raw materials supplied by the world's leading chemical giants,
Chemical material inventory of thousands of tons or more.Have more production capacity than peers.
The production process of the adhesives is completely enclosed to prevent external temperatures and various uncontrollable factors from affecting the quality of the product.
FINISHED PRODUCT STORAGE WAREHOUSE
APPLICATION
Apply to clean, dry and grease-free surfaces. Cut the nozzle at 45°angle to the desired shape and size. For better appearance, cover outside of joint areas with masking tape before application. Tool immediately after sealant application and remove masking tape before sealant skins.
SCOPE OF APPLICATION AND APPLICATION SCENARIOS
CAUTION
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
LIMITATIONS
1.Unsuitable for curtain wall structural applicatio
2.Do not use for below ground.
3.Do not use when substrate temperature is above 50ºC or surfaces that are wet, oily, greasy, dusty or dirty.
4.The surfaces coated with paint are unsuitable for sealant.
5.Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
STAFF CONSTRUCTION SCENE
HEALTH AND ENVIRONMENTAL INFORMATION
To support Customers in their product safety needs, HONGWAH has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
PROJECT CASE
EXHIBITIONS
CARGO TRANSPORTATION
FAQ
1. Are you a manufacturer?
Yes. We are a manufacturer of silicone sealant with standardized modern production facilities in Guangdong Province, China. A top 5 high-tech company in the industry.
HONGWAH has a 395,000 square foot silicone sealant factory in Jiangmen, Guangdong, China with 16 years of experience in this manufacturing area.
With a total investment of 800 million RMB, we have provided very high quality services to customers from 50 countries.
Our commitment to product quality and professional production team's honest and uncomplicated manufacturing style ensure our customers' trust in our products' consistent performance and superior performance.
2.How soon can I get an updated quote?
We can provide a quote within no more than 24 hours, provided we know all the details of the requirements.
3. Do you accept private label OEM production?
Yes. We can do OEM for our customers.
4. Can I get a sample before I order?
Of course you can. Generally, we provide 1-5 pieces of free samples. The courier fee is borne by the customer. Thank you for your understanding.
5. How long will it take you to complete my order?
It depends on the quantity of your order. Generally, we only need 5 days to produce 20,000 pieces with a capacity of 1,600 tons a month, after receiving your payment.
6. How do you ensure quality?
We have a strict quality inspection system, from raw materials to finished products, the materials must be checked and signed by QC colleagues.
7.Can I visit your factory?
Welcome. Please let me know your travel plans and we will pick you up and book your hotel.
8.How to find the right sealant?
Please tell me the purpose of your application, the base material, the application method and all your requirements.