Sealant for Office Large Frameless Glass Wall: High Viscosity Silicone Quick-Drying Caulking Glue, Sealing Waterproof Fixing Adhesive

• Customization: Available
• CAS No.: 63148-60-7
• Formula: C16h22o2si2
• Model NO.: JBN-3900
• EINECS: 51852-81-4
• Bonding Function: Structural Adhesive
• Morphology: Paste
• Application: Automobile, Construction, Woodworking
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Natural Polymer
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Black White Grey Clear
• Transport Package: 24PCS/CTN
• Specification: 240ml/280ml/300ml tube
• Trademark: JANBENA
• Origin: China
• HS Code: 3506100010
• Production Capacity: 300000 PCS/Month

Product Description

JBN-3900 Single Component Acidic Curing Silicone Glass Glue is specially formulated for professional use in a variety of glass projects. It is ideal for large glass installations, advanced glass projects, lighting ceilings, and the installation of various aluminum alloy glass doors and windows. Additionally, it is suitable for large window assembly and sealing projects.

Key Features:

Single component formula for easy application

Acidic curing for strong bonding

Suitable for a wide range of materials including glass, ceramics, fiberglass, non-oily wood, and aluminum profiles

Ensures excellent adhesion and sealing

Applicable Materials:

Glass

Ceramics

Fiberglass

Non-oily wood

Aluminum profiles

Painted material surfaces (Note: Remove surface coating wax from powder-sprayed aluminum alloy using a solvent before application.)

Use Restrictions:

Not suitable for concrete or cement building materials

Avoid use on substrates containing zinc, brass, copper, lead, etc.

Do not use in continuous immersion in water or in completely isolated air environments before curing

Not recommended for surfaces that require painting or for use in engineering applications requiring architectural grade sealants

Choose JBN-3900 for a professional-grade solution that delivers exceptional results in your glass and window projects.

 

 

 

 

 

 

Shelf life: 12 months

PERFORMANCE DATA
Test Parameter	Unit	Result
As Supplied Tested at 23ºC and 50% RH
Specific Gravity	g/ml	0.96±0.02
Flow (sag or slump)	mm	0
Extrusion Rate	ml/minute	150
Skin Time	minute	5~10
Tack-free Time	hour	≤1.0
Curing time (5mm)	hour	≤12
As Cured-after 21 days at 23ºC and 50% RH
Durometer Hardness, Shore A	Points	22
Movement Capability	%	30
Tensile/Modulus at 50% Elongation	Mpa	0.31
Tensile/Modulus at 100% Elongation	Mpa	0.35
Ultimate Tensile Strength	Mpa	0.42
Ultimate Elongation at Break	%	375

 

 

We use raw materials supplied by the world's leading chemical giants,
Chemical material inventory of thousands of tons or more.Have more production capacity than peers.

The production process of the adhesives is completely enclosed to prevent external temperatures and various uncontrollable factors from affecting the quality of the product.

FINISHED PRODUCT STORAGE WAREHOUSE

APPLICATION
Apply to clean, dry and grease-free surfaces. Cut the nozzle at 45°angle to the desired shape and size. For better appearance, cover outside of joint areas with masking tape before application.  Tool immediately after sealant application and remove masking tape before sealant skins.
SCOPE OF APPLICATION AND APPLICATION SCENARIOS

CAUTION
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.

LIMITATIONS
1.Unsuitable for curtain wall structural applicatio
2.Do not use for below ground.
3.Do not use when substrate temperature is above 50ºC or surfaces that are wet, oily, greasy, dusty or       dirty.
4.The surfaces coated with paint are unsuitable for sealant.
5.Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor     the sealant, particularly during sealant cure.

STAFF CONSTRUCTION SCENE

HEALTH AND ENVIRONMENTAL INFORMATION
To support Customers in their product safety needs, HONGWAH  has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. 

PROJECT CASE

EXHIBITIONS

CARGO TRANSPORTATION
                                                                  FAQ 

1. Are you a manufacturer?
   
   Yes. We are a manufacturer of silicone sealant with standardized modern production facilities in Guangdong Province, China. A top 5 high-tech company in the industry.
HONGWAH has a 395,000 square foot silicone sealant factory in Jiangmen, Guangdong, China with 16 years of experience in this manufacturing area.
With a total investment of 800 million RMB, we have provided very high quality services to customers from 50 countries. 
Our commitment to product quality and professional production team's honest and uncomplicated manufacturing style ensure our customers' trust in our products' consistent performance and superior performance.

2.How soon can I get an updated quote?

   We can provide a quote within no more than 24 hours, provided we know all the details of the requirements.

3. Do you accept private label OEM production?
   
    Yes. We can do OEM for our customers.

4. Can I get a sample before I order?

    Of course you can. Generally, we provide 1-5 pieces of free samples. The courier fee is borne by the customer. Thank you for your understanding.

5. How long will it take you to complete my order?
   
    It depends on the quantity of your order. Generally, we only need 5 days to produce 20,000 pieces with a capacity of 1,600 tons a month, after receiving your payment.

6. How do you ensure quality?
   
    We have a strict quality inspection system, from raw materials to finished products, the materials must be checked and signed by QC colleagues.

7.Can I visit your factory?
   
    Welcome. Please let me know your travel plans and we will pick you up and book your hotel.

8.How to find the right sealant?
   
   Please tell me the purpose of your application, the base material, the application method and all your requirements.