Introducing JBN-9900 Single Component Neutral Ketoxime Sealant: Your Ultimate Building Weathering Solution
Unlock the potential of your construction projects with JBN-9900, a cutting-edge single-component sealant meticulously engineered for enduring performance in diverse environments. Crafted with precision, JBN-9900 features a neutral ketoxime curing type, offering medium modulus and exceptional durability against the elements.
With JBN-9900, achieve a superior adhesion and weather resistance sealant on a wide array of building materials. From stainless steel glass doors to coated glass, ceramics, fiberglass, and more, JBN-9900 provides a high-performance solution for your assembly and sealing needs.
This versatile sealant is ideal for indoor and outdoor applications, including stainless steel screens, interior decorations, and various plastic and wooden surfaces. Its high adhesion ensures a reliable bond, while its weather resistance properties guarantee longevity in any climate.
However, it's important to note usage restrictions. JBN-9900 is not recommended for applications where the construction substrate's surface temperature exceeds 50°C. Additionally, ensure proper air circulation during curing for optimal results.
Empower your projects with JBN-9900, where professionalism meets reliability. Backed by a shelf life of 12 months, JBN-9900 stands as your steadfast partner in building weathering challenges. Elevate your creations with confidence-choose JBN-9900 for enduring performance and superior sealing capabilities.
| PERFORMANCE DATA |
|
|
|
| Test Parameter |
Unit |
Result Translucent Pigmented |
| As Supplied Tested at 23ºC and 50% RH |
| Specific Gravity |
g/ml |
0.98±0.02 |
1.32±0.02 |
| Flow (sag or slump) |
mm |
0 |
0 |
| Extrusion Rate |
ml/minute |
180 |
123 |
| Skin Time |
minute |
5~10 |
≤60 |
| Tack-free Time |
hour |
≤1.0 |
≤5 |
| Curing time (5mm) |
hour |
≤12 |
≤16 |
| As Cured-after 21 days at 23ºC and 50% RH |
| Durometer Hardness, Shore A |
Points |
28 |
42 |
| Elastic Recovery |
% |
98 |
98 |
| Movement Capability |
% |
±25 |
±40 |
| Tensile/Modulus at 50% Elongation |
% |
0.27 |
0.52 |
| Tensile/Modulus at 100% Elongation |
% |
0.35 |
0.68 |
| Ultimate Tensile Strength |
Mpa |
0.37 |
0.84 |
| Ultimate Elongation at Break |
% |
220 |
420 |
We use raw materials supplied by the world's leading chemical giants,
Chemical material inventory of thousands of tons or more.Have more production capacity than peers.
The adhesive manufacturing process is completely enclosed to prevent external temperatures and various uncontrollable factors from affecting the product quality.
FINISHED PRODUCT STORAGE WAREHOUSE
APPLICATION
Apply to clean, dry and grease-free surfaces. Cut the nozzle at 45°angle to the desired shape and size. For better appearance, cover outside of joint areas with masking tape before application.
Tool immediately after sealant application and remove masking tape before sealant skins.
Caution
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
LIMITATIONS
1.Unsuitable for curtain wall structural applicatio
2.Do not use for below ground.
3.Do not use when substrate temperature is above 50ºC or surfaces that are wet, oily, greasy, dusty or dirty.
4.The surfaces coated with paint are unsuitable for sealant.
5.Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
Scope of application and application scenarios
STAFF CONSTRUCTION SCENE
PROJECT CASE
HEALTH AND ENVIRONMENTAL INFORMATION
To support Customers in their product safety needs, HONGWAH has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
EXHIBITIONS
CARGO TRANSPORTATION
FAQ
1. Are you a manufacturer?
Yes. We are a manufacturer of silicone sealant with standardized modern production facilities in Guangdong Province, China. A top 5 high-tech company in the industry.
HONGWAH has a 395,000 square foot silicone sealant factory in Jiangmen, Guangdong, China with 16 years of experience in this manufacturing area.
With a total investment of 800 million RMB, we have provided very high quality services to customers from 50 countries.
Our commitment to product quality and professional production team's honest and uncomplicated manufacturing style ensure our customers' trust in our products' consistent performance and superior performance.
2.How soon can I get an updated quote?
We can provide a quote within no more than 24 hours, provided we know all the details of the requirements.
3. Do you accept private label OEM production?
Yes. We can do OEM for our customers.
4. Can I get a sample before I order?
Of course you can. Generally, we provide 1-5 pieces of free samples. The courier fee is borne by the customer. Thank you for your understanding.
5. How long will it take you to complete my order?
It depends on the quantity of your order. Generally, we only need 5 days to produce 20,000 pieces with a capacity of 1,600 tons a month, after receiving your payment.
6. How do you ensure quality?
We have a strict quality inspection system, from raw materials to finished products, the materials must be checked and signed by QC colleagues.
7.Can I visit your factory?
Welcome. Please let me know your travel plans and we will pick you up and book your hotel.
8.How to find the right sealant?
Please tell me the purpose of your application, the base material, the application method and all your requirements.
Audited Supplier 
The adhesive manufacturing process is completely enclosed to prevent external temperatures and various uncontrollable factors from affecting the product quality.
){kind=link}
){kind=link}